b'White Oak H ardwoodI ndustrIes , I nc .www.hardwoodind.comCABINET H.I. QUARTER(CAB HI QS) SKUs: 44CHIAWOQSSAWNCabinet H.I. QS is graded from NHLA 1 Common for 90% or better vertical grain (VG) face, 80% or better VG back with growth rings ranging from 75 to 90 degrees perpendicular to the face to maximize the appearance of medullary ray.Designed for high-yielding applications that require a high percentage of clarity on both the face and back of the board.It is ideal for mid-length, clear 2 face, and clear 1 face cuttings that require a quarter sawn appearance.Cabinet H.I. QS grades NHLA #1C after H/M surfacing.The following specs improve or clarify the H.I. brand vs. NHLA standards: Quarter Sawn:Grade Face: 100% to 90% VG face after straight-line rip.Minimum Yield: 66-2/3% on both faces. Back Face: 100% to 80% VG face after straight-line rip.Splits: Maximum split allowed on each end is equal to Growth Ring Angle: 750 to 900 perpendicular to face.the square footage of the board in inches. Heart: No specification.Sticker stain: Not allowed on best face.Treated as a Dimensions: Width 3-1/4" and wider, Length 4\' to 16\'.defect on the back. Manufacturing: Not more than 1" of bow, side- bend, wave, orColor: No specification. twist in 8\' of length.Wane: Max. 1/2 length on 1 edge or equivalent on both. Trim backs: Up to 25% maximum.Front BackGRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED GRADE CERTIFIEDTALLY GUARANTEED4.3 3.5 2.7 4.2 2.0 4.2 4.6H ardwoodI ndustrIes , I nc . www.hardwoodind.com'