Walnut Front Back Hardwood Industries, Inc. hardwoodind.com Hardwood Industries, Inc. www.hardwoodind.com Board Length Minimum Big-Cut* 6 ft. 5-1/2" x 62" 7 ft. 5-1/2" x 74" 8 ft. 5-1/2" x 86" 9 - 10 ft. 5-1/2" x 98" 11 - 12 ft. 5-1/2" x 110" Superior Veneer is designed for high-yielding big-cut applications that require a very high percentage of clarity and heartwood on both the face and back of the board. It is ideal for wide rip, long, clear 2 face heart cuttings. Superior Veneer (SUP V)) • 44SVEW(L) SKUs: *Denotes clear heart 2 face cut. • Heart: Grade Face: 90% to 100% heart face after straight-line rip. Back Face: 70% to 100% heart face after straight-line rip. • Graded from the worst face after surfacing. • Dimensions: Widths 6" and wider, Lengths 6' to 12'. • Minimum yield: 83-1/3% both faces. • One big cut required in each board, as shown in the table to the right. • Size of the cut varies by length of the board. • Minimum cutting: 4" x 3' & 3" x 6' on both faces. Unlimited cuttings on both faces. • Manufacturing: Not more than 1/2" of bow, side-bend, wave, or twist in 8' of length. • Trim backs: Not allowed. • Splits: Maximum split allowed on each end is equal to the square footage of the board in inches. • Color: Saddleback sap pulled. Superior Veneer grades NHLA FAS at H/M, graded from lumber cut from veneer logs, with the following exceptions: