Walnut Hardwood Industries, Inc. hardwoodind.com Hardwood Industries, Inc. www.hardwoodind.com Front Back Cabinet Prime grades standard NHLA #1C at H/M with the following exceptions: • Heart: Grade Face: 90% to 100% heart face after straight-line rip. Back Face: 70% to 100% heart face after straight-line rip. • Graded from the worst face after surfacing. • Surfacing: 80% or better clean at H/M on both faces. • Dimensions: Width 3-1/4" and wider, Length 4' to 16'. • Manufacturing: Not more than 1/2" of bow, side-bend, wave, or twist in 8' of length. • Trim backs: No specification. • Splits: Maximum split allowed on each end is equal to the square footage of the board in inches. • Color: Saddleback sap pulled. Cabinet Prime is ideal for making cabinet doors and drawer fronts. Considered the high end of mid-grade lumber yielding 66-2/3% to 83-1/3% clear face cuttings with a minimum cutting size of 3" x 3' or 4" x 2'. Ideal for mid length clear 2 face, and clear 1 face cuttings that require a very high percentage of heartwood on both the face and the back of the board. No saddleback sap or boards with more than 20% miss are allowed. Cabinet Prime (CAB P)) • 44CPEW(L) SKUs: