b'Hard Maple H ardwoodI ndustrIes , I nc .www.hardwoodind.comSUPERIOR PLUS C 5-1/4" to 6" WIDTH(SUP + C) SKU: 44S+EMC(L)SORTSuperior Plus C is similar to Superior Plus with the exception of isolating high-yielding narrow boards between 5-1/4" to 6" with a minimum big-cut.Ideal for single rip, long, clear 2 face and clear 1 face sap applications.Superior Plus C grades NHLA S/B after H/M surfacing.The following specs improve or clarify H.I. brand vs. NHLA standards: Sap:Grade Face: 100% sap face after straight-line rip.Manufacturing: Not more than 1/2" of bow,BOARDMINIMUMBack Face: 50% or better sap face after side-bend, wave, or twist in 8\' of length. LENGTH BIG-CUT *straight-line rip.Splits: Maximum split allowed on each end is 7 - 8 ft. 5" x 84" Dimensions: Widths 5-1/4" to 6", Lengths 7\' to 16\'. equal to the square footage of the board in inches.Minimum Yield: 83-1/3% on the best face, 66-2/3%Sticker stain: Not allowed on best face.9 - 10 ft. 5" x 100"on the back face.Treated as a defect on the back. 11 - 12 ft. 5" x 120" One big cut required in each board, as shown inBlack Streak: Maximum 1 black streak/sm of the 13 - 14 ft. 5" x 140" the table to the right.piece on best face, no restriction on back face. 15 - 16 ft. 5" x 160" Size of the cut varies by length of the board.Color: Material from specific regions and mills. *Denotes clear sap 1 face cut. Trim backs: Up to 25% maximum.Front BackGRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED GRADE CERwwwTIFIED.hardwToodind.comALLY GUARANTEED3.9 MAPLE 3.5 MAPLE 3.9 MAPLE 3.8 MAPLE 3.9 MAPLE 3.8 MAPLE 4.0 MAPLEH ardwoodI ndustrIes , I nc . www.hardwoodind.com'